# text: "This program contains material from the sample program \"Chassis,\" and the program \"MacEden,\" which were originally created and copyrighted by Charles A. Hoffman."
# item 6: TEXT (0x88) disabled
# bounds: x1=20 y1=52 x2=316 y2=182
# text: "Consider adding the following items to your “About” text:\n\n • A very short description of the application.\n • Contact information for technical support."
DITL_130_Kudos DITL.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=236 y1=180 x2=317 y2=200
# text: "Applause!"
# item 1: TEXT (0x88) disabled
# bounds: x1=144 y1=7 x2=187 y2=23
# text: "Kudos"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=228 y1=172 x2=327 y2=208
# data: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=14 y1=37 x2=324 y2=171
# text: "Here\'s a place to give credit to those who helped you write or test the application. Such as:\n\n• Frank Enstein, Jack T. Ripper, Dudley Doright, Elizabeth Regina, and M. Mouse, for pre-release testing."
DITL_131_# Windows DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=233 y1=84 x2=291 y2=104
# text: "Okay"
# item 1: TEXT (0x88) disabled
# bounds: x1=81 y1=7 x2=291 y2=77
# text: "Close some windows before you proceed. This program handles only a limited number of windows."
DITL_132_Paste too big DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=313 y1=140 x2=371 y2=160
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=372 y2=130
# text: "Sorry. There were too many characters for the editor in this program to paste into the text.\n\nPlease delete some text first, or select a larger range to be replaced by the pasted text."
DITL_133_Too many chars DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=120 x2=372 y2=140
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=372 y2=114
# text: "Sorry. There are too many characters for this editor.\n\nPlease delete some text first, or select a larger range to be replaced by the typed in text."
DITL_134_Bad open DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=316 y1=121 x2=374 y2=141
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=372 y2=114
# text: "Unable to open “^0.”\n\nPlease ensure that it is not already in use, and that it is not in use by another application. Then try again."
DITL_135_File too big DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=125 x2=372 y2=145
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=121
# text: "Sorry. “^0” is too large for the editor in this program.\n\nPlease use another editor or program to delete some text or to break the file into smaller segments first."
DITL_136_Bad EOF DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=125 x2=372 y2=145
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=121
# text: "Awk!! The end of the file “^0” couldn\'t be found. The file can\'t be used by this application.\n\nPlease use a different file instead."
DITL_137_Bad Save DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=107 x2=372 y2=127
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=103
# text: "“^0” was not successfully saved.\n\nTry using “Save As…” to save the file using a different name or a different disk."
DITL_138_Bad Close DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=107 x2=372 y2=127
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=103
# text: "“^0” was not successfully closed.\n\nQuit this application, then inspect the file for damaged or lost data."
DITL_139_Want save DITL.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=18 y1=90 x2=98 y2=110
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=207 y1=123 x2=287 y2=143
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=18 y1=123 x2=98 y2=143
# text: "No"
# item 3: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=285 y2=78
# text: "Do you want to save the changes you have made to “^0”?"
DITL_140_Can't write DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=155 x2=372 y2=175
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=147
# text: "Unsuccessful write to “^0.”\n\nCheck to see whether the file is locked or the disk is full.\n\nQuit this application, then inspect the file for damaged or lost data."
DITL_141_Printing DITL.txt
# 0 entries
DITL_142_Print error DITL.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=315 y1=256 x2=373 y2=276
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=68
# text: "Unsuccessful print.\n\nCheck the following and try again."
# item 2: TEXT (0x88) disabled
# bounds: x1=89 y1=67 x2=371 y2=246
# text: "Check to see that the printer is properly set up with the Chooser.\n\nIf you are on a network, check your network connections.\n\nCheck for enough disk space to temporarily hold the print.\n\nUse Find Info to check program memory size."
# item 3: TEXT (0x88) disabled
# bounds: x1=71 y1=67 x2=90 y2=246
# text: "•\n\n\n•\n\n\n•\n\n\n•"
DITL_143_Copy, Cut, Paste DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=244 y1=162 x2=302 y2=182
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=72 y1=20 x2=298 y2=152
# text: "Sorry. There has been a problem with copying, cutting, or pasting to or from the desk scrap area.\n\nTry selecting a smaller amount of text, and, for a copy or paste, ensure that you are copying a text item."
